TableColumnDetails

Пакет	com.adobe.icc.vo
Класс	public class TableColumnDetails
Наследование	TableColumnDetails Object
Реализует	IManaged

Язык версии:

ActionScript 3.0

Версия продукта:

Asset Composer Building Block 10

Версии среды выполнения:

AIR (unsupported), Flash Player 10.2

Represents a table column. This is populated at the time of assigning a TableLayout to target area. Contains information corresponding to each table column for generating table XFA at runtime.

Общедоступные свойства

Скрыть унаследованные общедоступные свойства

Показать унаследованные общедоступные свойства

	Свойство		Определено
		columnType : String Type of the table column	TableColumnDetails
		columnWidth : Number Ratio of columns width with respect to the entire table	TableColumnDetails
		constructor : Object Ссылка на объект класса или функцию конструктора для данного экземпляра объекта.	Object
		footerName : String Footer name of the Table column	TableColumnDetails
		headerName : String Header name of the Table column	TableColumnDetails
		id : String Identifier of the Table column	TableColumnDetails
		isExtended : Boolean The flag indicating if the column was present in original layout or added after customization	TableColumnDetails

Общедоступные методы

Скрыть унаследованные общедоступные методы

Показать унаследованные общедоступные методы

	Метод		Определено
		TableColumnDetails() Constructor	TableColumnDetails
		addEventListener(type:String, listener:Function, useCapture:Boolean = false, priority:int = 0, weakRef:Boolean = false):void Registers an event listener object with an EventDispatcher object so that the listener receives notification of an event.	TableColumnDetails
		dispatchEvent(event:Event):Boolean Dispatches an event into the event flow.	TableColumnDetails
		hasEventListener(type:String):Boolean Checks whether the EventDispatcher object has any listeners registered for a specific type of event.	TableColumnDetails
		hasOwnProperty(name:String):Boolean Показывает, определено ли заданное свойство для объекта.	Object
		isPrototypeOf(theClass:Object):Boolean Показывает, есть ли экземпляр класса Object в цепи прототипов объекта, заданного в качестве параметра.	Object
		propertyIsEnumerable(name:String):Boolean Показывает наличие заданного свойства и его перечисляемость.	Object
		removeEventListener(type:String, listener:Function, useCapture:Boolean = false):void Removes a listener from the EventDispatcher object.	TableColumnDetails
		setPropertyIsEnumerable(name:String, isEnum:Boolean = true):void Задает доступность динамического свойства для операций цикла.	Object
		toLocaleString():String Возвращает строковое представление этого объекта, отформатированного в соответствии со стандартами, принятыми для данной локали.	Object
		toString():String Возвращает строковое представление заданного объекта.	Object
		valueOf():Object Возвращает элементарное значение заданного объекта.	Object
		willTrigger(type:String):Boolean Checks whether an event listener is registered with this EventDispatcher object or any of its ancestors for the specified event type.	TableColumnDetails

Общедоступные константы

	Константа		Определено
		TYPE_FIELD : String = "FIELD" [статические] The constant representing the fact that table's cell is associated with the field	TableColumnDetails
		TYPE_TARGET_AREA : String = "TARGET_AREA" [статические] The constant representing the fact that table's cell is associated with the target area	TableColumnDetails

Сведения о свойстве

columnType

свойство

columnType:String

Язык версии:

ActionScript 3.0

Версия продукта:

Asset Composer Building Block 10

Версии среды выполнения:

AIR (unsupported), Flash Player 10.2

Type of the table column

Это свойство можно использовать в качестве источника для связывания данных. При изменении этого свойства отправляется событие propertyChange .

Реализация
public function get columnType():String
public function set columnType(value:String):void

columnWidth

свойство

columnWidth:Number

Язык версии:

ActionScript 3.0

Версия продукта:

Asset Composer Building Block 10

Версии среды выполнения:

AIR (unsupported), Flash Player 10.2

Ratio of columns width with respect to the entire table

Реализация
public function get columnWidth():Number
public function set columnWidth(value:Number):void

footerName

свойство

footerName:String

Язык версии:

ActionScript 3.0

Версия продукта:

Asset Composer Building Block 10

Версии среды выполнения:

AIR (unsupported), Flash Player 10.2

Footer name of the Table column

Реализация
public function get footerName():String
public function set footerName(value:String):void

headerName

свойство

headerName:String

Язык версии:

ActionScript 3.0

Версия продукта:

Asset Composer Building Block 10

Версии среды выполнения:

AIR (unsupported), Flash Player 10.2

Header name of the Table column

Реализация
public function get headerName():String
public function set headerName(value:String):void

id

свойство

id:String

Язык версии:

ActionScript 3.0

Версия продукта:

Asset Composer Building Block 10

Версии среды выполнения:

AIR (unsupported), Flash Player 10.2

Identifier of the Table column

Реализация
public function get id():String
public function set id(value:String):void

isExtended

свойство

isExtended:Boolean

Язык версии:

ActionScript 3.0

Версия продукта:

Asset Composer Building Block 10

Версии среды выполнения:

AIR (unsupported), Flash Player 10.2

The flag indicating if the column was present in original layout or added after customization

Реализация
public function get isExtended():Boolean
public function set isExtended(value:Boolean):void

Сведения о конструкторе

()

Конструктор

public function TableColumnDetails()

Язык версии:

ActionScript 3.0

Версия продукта:

Asset Composer Building Block 10

Версии среды выполнения:

AIR (unsupported), Flash Player 10.2

Constructor

Сведения о методе

addEventListener

()

метод

 public function addEventListener(type:String, listener:Function, useCapture:Boolean = false, priority:int = 0, weakRef:Boolean = false):void

Registers an event listener object with an EventDispatcher object so that the listener receives notification of an event. You can register event listeners on all nodes in the display list for a specific type of event, phase, and priority.

After you successfully register an event listener, you cannot change its priority through additional calls to addEventListener(). To change a listener's priority, you must first call removeEventListener(). Then you can register the listener again with the new priority level.

After the listener is registered, subsequent calls to addEventListener() with a different value for either type or useCapture result in the creation of a separate listener registration. For example, if you first register a listener with useCapture set to true, it listens only during the capture phase. If you call addEventListener() again using the same listener object, but with useCapture set to false, you have two separate listeners: one that listens during the capture phase, and another that listens during the target and bubbling phases.

You cannot register an event listener for only the target phase or the bubbling phase. Those phases are coupled during registration because bubbling applies only to the ancestors of the target node.

When you no longer need an event listener, remove it by calling EventDispatcher.removeEventListener(); otherwise, memory problems might result. Objects with registered event listeners are not automatically removed from memory because the garbage collector does not remove objects that still have references.

Copying an EventDispatcher instance does not copy the event listeners attached to it. (If your newly created node needs an event listener, you must attach the listener after creating the node.) However, if you move an EventDispatcher instance, the event listeners attached to it move along with it.

If the event listener is being registered on a node while an event is also being processed on this node, the event listener is not triggered during the current phase but may be triggered during a later phase in the event flow, such as the bubbling phase.

If an event listener is removed from a node while an event is being processed on the node, it is still triggered by the current actions. After it is removed, the event listener is never invoked again (unless it is registered again for future processing).

Параметры

	`type:String` — The type of event.

	`listener:Function` — The listener function that processes the event. This function must accept an event object as its only parameter and must return nothing, as this example shows: `function(evt:Event):void` The function can have any name.

	`useCapture:Boolean` (default = `false`) — Determines whether the listener works in the capture phase or the target and bubbling phases. If `useCapture` is set to `true`, the listener processes the event only during the capture phase and not in the target or bubbling phase. If `useCapture` is `false`, the listener processes the event only during the target or bubbling phase. To listen for the event in all three phases, call `addEventListener()` twice, once with `useCapture` set to `true`, then again with `useCapture` set to `false`.

	`priority:int` (default = `0`) — The priority level of the event listener. Priorities are designated by a 32-bit integer. The higher the number, the higher the priority. All listeners with priority n are processed before listeners of priority n-1. If two or more listeners share the same priority, they are processed in the order in which they were added. The default priority is 0.

	`weakRef:Boolean` (default = `false`) — Determines whether the reference to the listener is strong or weak. A strong reference (the default) prevents your listener from being garbage-collected. A weak reference does not. Class-level member functions are not subject to garbage collection, so you can set `useWeakReference` to `true` for class-level member functions without subjecting them to garbage collection. If you set `useWeakReference` to `true` for a listener that is a nested inner function, the function will be garbge-collected and no longer persistent. If you create references to the inner function (save it in another variable) then it is not garbage-collected and stays persistent.

dispatchEvent

()

метод

public function dispatchEvent(event:Event):Boolean

Dispatches an event into the event flow. The event target is the EventDispatcher object upon which dispatchEvent() is called.

Параметры

event:Event — The event object dispatched into the event flow.

Возвращает

Boolean — A value of true unless preventDefault() is called on the event, in which case it returns false.

hasEventListener

()

метод

public function hasEventListener(type:String):Boolean

Checks whether the EventDispatcher object has any listeners registered for a specific type of event. This allows you to determine where an EventDispatcher object has altered handling of an event type in the event flow hierarchy. To determine whether a specific event type will actually trigger an event listener, use IEventDispatcher.willTrigger().

The difference between hasEventListener() and willTrigger() is that hasEventListener() examines only the object to which it belongs, whereas willTrigger() examines the entire event flow for the event specified by the type parameter.

Параметры

type:String — The type of event.

Возвращает

Boolean — A value of true if a listener of the specified type is registered; false otherwise.

removeEventListener

()

метод

public function removeEventListener(type:String, listener:Function, useCapture:Boolean = false):void

Removes a listener from the EventDispatcher object. If there is no matching listener registered with the EventDispatcher object, a call to this method has no effect.

Параметры

	`type:String` — The type of event.

	`listener:Function` — The listener object to remove.

	`useCapture:Boolean` (default = `false`) — Specifies whether the listener was registered for the capture phase or the target and bubbling phases. If the listener was registered for both the capture phase and the target and bubbling phases, two calls to `removeEventListener()` are required to remove both: one call with `useCapture` set to `true`, and another call with `useCapture` set to `false`.

willTrigger

()

метод

public function willTrigger(type:String):Boolean

Checks whether an event listener is registered with this EventDispatcher object or any of its ancestors for the specified event type. This method returns true if an event listener is triggered during any phase of the event flow when an event of the specified type is dispatched to this EventDispatcher object or any of its descendants.

Параметры

type:String — The type of event.

Возвращает

Boolean — A value of true if a listener of the specified type will be triggered; false otherwise.

Сведения о константе

TYPE_FIELD

Константа

public static const TYPE_FIELD:String = "FIELD"

Язык версии:

ActionScript 3.0

Версия продукта:

Asset Composer Building Block 10

Версии среды выполнения:

AIR (unsupported), Flash Player 10.2

The constant representing the fact that table's cell is associated with the field

TYPE_TARGET_AREA

Константа

public static const TYPE_TARGET_AREA:String = "TARGET_AREA"

Язык версии:

ActionScript 3.0

Версия продукта:

Asset Composer Building Block 10

Версии среды выполнения:

AIR (unsupported), Flash Player 10.2

The constant representing the fact that table's cell is associated with the target area

Юридическая информация | Политика конфиденциальности онлайн

TableColumnDetails - AS3 Формирователь активов

Классы x

columnType

columnWidth

footerName

headerName

id

isExtended